Aerospace Titanium Alloys data sheet

Titanium Alloy | General Information

Aerospace Titanium Alloys

CommercialList

Download PDF

Below is a list of Aerospace Titanium and Titanium Alloy specifications including MIL and AMS

AMS Titanium Alloys

AMS 4900

AMS 4901M ANNEALED SHEET STRIP & PLATE

AMS 4902F ANNEALED SHEET STRIP & PLATE

AMS 4907-6Al 4V ELI

AMS 4910

AMS 4911

AMS 4915

AMS 4916

AMS 4918

AMS 4919

AMS 4921

AMS 4926
AMS 4928

AMS 4930

AMS 4931

AMS 4941C WELDED TUBING, ANNEALED

AMS 4942C SEAMLESS, TUBING ANNEALED

AMS 4943

AMS 4944

AMS 4951F Commercially Pure Welding Wire

AMS 4965

AMS 4966

AMS 4967

AMS 4971

AMS 4972

AMS 4975

AMS 4978

AMS 4979

AMS 4981

AMS 4985

AMS 4991

MIL Titanium Alloys

MIL-T-9046 (TYPE 1 COMP A) CP3

MIL-T-9046(TYPE 1 COMP B)

Titanium Alloys

TA1- CP 290-420 MPa Sheet & Strip

TA2 - CP 390-540 MPa Sheet & Strip

TA3, TA4, TA5, (obsolescent)

TA6 - CP 570-730 MPa Sheet & Strip

TA7

TA8

TA9

TA10

TA11

TA12

TA13

TA14/TA15/TA16/TA17/TA18/TA19/TA20 (withdrawn)

TA21

TA22

TA23

TA24

TA25, TA 26, TA27, (withdrawn)

TA28

TA29/TA30/TA31/TA32/TA33/TA34/TA35 (withdrawn)

TA36 / TA37 (withdrawn)

TA38

TA39

TA40

TA41

TA42

TA43

TA44

TA45

TA46

TA47

TA48

TA49

TA50

TA51

TA52

TA53

TA54

TA55

TA56

TA57

TA58

TA59

TA100

DTD 5123

DTD 5163

DTD 5363

IM1 125
Grade 5 6AL4V-ELI Titanium

Download PDF
Last updated 07 November 2013

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.

Resources

Strength in numbers

Titanium Alloy | General Information